0731-868462280731-86846228
描述：SS-705X盤式制動器拉床根據客戶所提供產品圖紙?jiān)O(shè)計夾具，刀具裝在刀盒內向下拉削，采用回轉工作臺可分為四工位和八工位循環加工。
廠商性質
生產廠家更新時間
2025-03-12訪問量
6704
ARTICLES致力于成為更好的解決方案供應商！
2024-09-10
+2022-07-25
+2021-01-14
+
詳細介紹
| 品牌 | 泰翔/長沙插拉刨 | 產地 | 國產 |
|---|---|---|---|
| 控制形式 | 數控 | 自動化程度 | 全自動 |
| 傳動形式 | 液壓傳動 | 布局/工作形式 | 立式,連續,多工位,專用 |
| 數控系統 | 可選配,西門子/SIEMENS | 銷售區域 | 全國,華東,華南,華北,華中,東北,西南,西北,港澳臺,海外 |
盤式制動器及制動鉗的拉削加工
Processing of disc brake and brake caliper by broaching machine
盤式制動器及制動鉗的拉削是近期汽車工業發展的結果，引導我們進入該類零件的加工領域。對盤式制動器來講相對較易加工，而制動鉗由于本身的結構剛性差，易變形。因此，我們采用了各項措施：在拉削過程中，我們采用了不同的速度。粗、精拉削齒升量合理安排。
為了保證精度不受零件變形影響，在機床加工過程中，粗、精加工分段拉削。夾具增加輔支撐，減少零件變形。我們?yōu)榇松a(chǎn)的平面外拉床，其主要參數為：
額定拉力：200KN
額定行程：1600mm-2500mm
Processing of disc brake and brake caliper by broaching machine Development of auto in recent period leads us into the field of disc brake and brake caliper broaching.Broaching disc brake is easy, but the bad rigidity and deformation of brake caliper makes us adopt measures:
We adopt different speed when broaching for the purpose of getting reasonable arrangement of rise teeth of rough broaching and finish broaching.
In order to guarantee the accuracy not affected by deformation of parts, finish broaching and rough broaching is individually. Additionally sup-port of jigs will reduce deformation.
The main specification of external surface broaching machine.
as follows:
Rated pulling capacity: 200kN
Nominal stroke:1600mm-2500mm
產品咨詢
當前位置：